top of page

Grupo Curso Exocad Online

Público·32 membros
Andrew Stewart
Andrew Stewart

What's New in RSNetWorx for DeviceNet V21? Learn About the Latest Features and Improvements


RSNetWorx for DeviceNet V21 Download: What You Need to Know




If you are working with a DeviceNet network in a ControlLogix system, you might have heard of RSNetWorx for DeviceNet. This software is a powerful tool that allows you to design, configure, commission, troubleshoot, and communicate on your DeviceNet network. In this article, we will explain what RSNetWorx for DeviceNet is, what are its benefits and features, how to download it, how to use it, and what are some alternatives to it. By the end of this article, you will have a clear understanding of how RSNetWorx for DeviceNet can help you achieve maximum productivity with your DeviceNet network.




rsnetworxfordevicenetv21download



What is RSNetWorx for DeviceNet?




RSNetWorx for DeviceNet is a 32-bit Windows application program that allows you to configure DeviceNet devices. Using a graphical or spreadsheet representation of your network, you can configure all devices on the network.


DeviceNet is an industrial communication protocol that uses the Common Industrial Protocol (CIP) to provide peer-to-peer communication between devices such as sensors, actuators, drives, valves, controllers, and more. It is one of the most widely used protocols in industrial automation.


RSNetWorx for DeviceNet is part of the RSLogix 5000 software package that is used to program ControlLogix systems. ControlLogix is a programmable automation controller (PAC) platform that offers high-performance control and communication capabilities.


What are the benefits of RSNetWorx for DeviceNet?




Using RSNetWorx for DeviceNet can offer you several benefits, such as:



  • Rapid configuration of your DeviceNet network by means of a Windows-based point-and-click interface.



Requirement


Operating systemWindows 7, 8.1, or 10 (32-bit or 64-bit)


ProcessorPentium 4 or higher


Memory2 GB RAM or higher


Hard disk space1 GB or higher


Display1024 x 768 resolution or higher


Communication interface1784-PCD, 1784-U2DN, or 1784-KT card, or USB-to-DeviceNet cable


LicenseFactoryTalk Activation Manager or RSLinx Classic Gateway


In addition, you need to have the following software installed on your PC:



  • RSLinx Classic V2.59 or higher (for communication with devices)



  • RSLogix 5000 V16 or higher (for integration with ControlLogix systems)



  • Microsoft .NET Framework 4.0 or higher (for running the software)



  • Microsoft Internet Explorer 8.0 or higher (for accessing online help)



What are the steps to download RSNetWorx for DeviceNet V21?




To download RSNetWorx for DeviceNet V21, you need to follow these steps:





  • Click on the Products tab and select Software from the drop-down menu.



  • Click on the Design and Configuration category and select RSNetWorx from the list of products.



  • Click on the Downloads tab and select RSNetWorx for DeviceNet from the list of available downloads.



  • Select the version V21.00.00 from the drop-down menu and click on the Download button.



  • You will be prompted to sign in with your Rockwell Automation account. If you don't have one, you can create one for free by clicking on the Register Now button.



  • After signing in, you will be asked to accept the terms and conditions of the software license agreement. Click on the Accept button to proceed.



  • You will be redirected to a download page where you can choose the download method and location. You can either use the Download Manager or the Direct Download option.



  • The Download Manager is a tool that allows you to resume interrupted downloads, manage multiple downloads, and verify file integrity. To use it, you need to install it on your PC by clicking on the Install Download Manager button.



  • The Direct Download option allows you to download the software as a single file without using the Download Manager. To use it, you need to click on the Direct Download button and save the file to your desired location.



  • The file size of RSNetWorx for DeviceNet V21 is about 500 MB, so it may take some time depending on your internet speed and connection.



  • After downloading the file, you can proceed to install and activate the software on your PC.



How to install and activate RSNetWorx for DeviceNet V21?




To install and activate RSNetWorx for DeviceNet V21, you need to follow these steps:



  • Locate the downloaded file on your PC and double-click on it to start the installation process.



  • You will see a welcome screen that guides you through the installation process. Click on the Next button to continue.



  • You will see a screen that asks you to select the language for the installation. Choose your preferred language from the drop-down menu and click on the Next button.



  • You will see a screen that shows you the system requirements for running RSNetWorx for DeviceNet V21. Make sure that your PC meets these requirements and click on the Next button.



  • You will see a screen that asks you to select the destination folder for installing RSNetWorx for DeviceNet V21. You can either accept the default folder or browse for a different one. Click on the Next button after making your choice.



Next button after making your selection.


  • You will see a screen that shows you the progress of the installation. Wait for the installation to complete and click on the Finish button.



  • You will see a screen that asks you to restart your PC to complete the installation. Click on the Yes button to restart your PC.



  • After restarting your PC, you will see a screen that asks you to activate RSNetWorx for DeviceNet V21. You can either activate it online or offline.



  • To activate it online, you need to have a valid FactoryTalk Activation Manager or RSLinx Classic Gateway license. You can either use an existing license or purchase a new one from the Rockwell Automation website. You also need to have an internet connection and a Rockwell Automation account. Follow the instructions on the screen to activate RSNetWorx for DeviceNet V21 online.



  • To activate it offline, you need to have a valid FactoryTalk Activation Manager or RSLinx Classic Gateway license file. You can either use an existing license file or request a new one from the Rockwell Automation website. You also need to have a USB flash drive or a floppy disk to transfer the license file to your PC. Follow the instructions on the screen to activate RSNetWorx for DeviceNet V21 offline.



  • After activating RSNetWorx for DeviceNet V21, you can start using it on your PC.



How to use RSNetWorx for DeviceNet V21?




Now that you have installed and activated RSNetWorx for DeviceNet V21, you can start using it to design, configure, commission, troubleshoot, and communicate on your DeviceNet network. In this section, we will show you how to perform some common tasks with RSNetWorx for DeviceNet V21.


How to design and configure a DeviceNet network with RSNetWorx for DeviceNet V21?




To design and configure a DeviceNet network with RSNetWorx for DeviceNet V21, you need to follow these steps:



  • Launch RSNetWorx for DeviceNet V21 from your Start menu or desktop shortcut.



  • You will see a main window that consists of a menu bar, a toolbar, a project tree, a network view, and a status bar.



  • To create a new project, click on the File menu and select New Project. Alternatively, you can click on the New Project button on the toolbar.



  • You will see a dialog box that asks you to enter a name and description for your project. Enter the desired information and click on the OK button.



  • You will see a blank network view that represents your DeviceNet network. To add devices to your network, click on the Edit menu and select Add Device. Alternatively, you can click on the Add Device button on the toolbar.



  • You will see a device browser that shows you a list of available devices from various manufacturers. You can browse and select devices by category, vendor, model, or name. You can also search for devices by keyword or part number.



  • After selecting a device, click on the OK button. You will see a device editor that shows you the parameters, scan lists, I/O data, and EDS of the device. You can edit these settings as per your requirements.



  • After editing the device settings, click on the OK button. You will see the device added to your network view with its name, address, status, and icon.



  • Repeat steps 5 to 8 for each device that you want to add to your network.



  • To connect devices on your network, click on the Edit menu and select Connect Devices. Alternatively, you can click on the Connect Devices button on the toolbar.



  • You will see a connection editor that shows you the available connections between devices. You can select connections by type, direction, size, or priority. You can also create custom connections by specifying the source and destination devices and parameters.



  • After selecting a connection, click on the OK button. You will see the connection added to your network view with its type, size, and color.



  • Repeat steps 10 to 12 for each connection that you want to add to your network.



  • To save your project, click on the File menu and select Save Project. Alternatively, you can click on the Save Project button on the toolbar.



How to commission and troubleshoot a DeviceNet network with RSNetWorx for DeviceNet V21?




To commission and troubleshoot a DeviceNet network with RSNetWorx for DeviceNet V21 , you need to follow these steps:



  • Connect your PC to your DeviceNet network using a communication interface such as 1784-PCD, 1784-U2DN, or 1784-KT card, or USB-to-DeviceNet cable.



  • Launch RSNetWorx for DeviceNet V21 from your Start menu or desktop shortcut.



  • Open your project file by clicking on the File menu and selecting Open Project. Alternatively, you can click on the Open Project button on the toolbar.



  • Click on the Online menu and select Go Online. Alternatively, you can click on the Go Online button on the toolbar.



  • You will see a dialog box that asks you to select the communication interface and driver that you are using. Choose the appropriate option and click on the OK button.



  • You will see a dialog box that shows you the status of your communication interface and network. If everything is OK, click on the OK button. If there are any errors or warnings, click on the Details button to see more information.



  • You will see your network view updated with the online status of your devices and connections. You can also see the network traffic, errors, statistics, and events on the status bar.



  • To commission your DeviceNet network, you can use the following tools and features of RSNetWorx for DeviceNet V21:



  • The device editor that lets you edit device parameters, scan lists, I/O data, and EDS online.



  • The connection editor that lets you edit connection parameters online.



  • The device tester that lets you test device functionality online.



  • The network monitor that lets you monitor network traffic, errors, statistics, and events online.



  • To troubleshoot your DeviceNet network, you can use the following tools and features of RSNetWorx for DeviceNet V21:



  • The network analyzer that lets you capture and analyze network messages, filter and search data, and export data to other applications online.



  • The network simulator that lets you simulate a DeviceNet network on your PC without connecting to a physical network offline.



  • The firmware updater that lets you update the firmware of your devices online.